
Save To Wishlist
Saved To Wishlist
Please Wait. Loading
Rustica Unassembled Kit Door Guide
1. In some areas of the country we see more damage than acceptable when kits doors are shipped unassembled in a ground shipping box, so it is possible that a kit door may ship in a crate via a freight carrier so that your beautiful door arrives without damage.
2. If shipped put together in a crate the overlays will be left to be installed on site. We recommend that you attach them with pin nails, wood glue or (if neither of those are good options) you can use ½” wood screws (not included and not recommended).
3. Many Rustica door kits have the same options as the recommended Rustica assembled doors but are offered with a more economical price.
4. Door kits do not have a warranty against warping, separating or splitting.
5. It is possible that your kit door may come unassembled and need to be assembled using the 7 inch lag screws through the side of the stiles.
6. For both Kit and Assembled doors... the hardware (hangers, handles and pulls) are not installed and the doors are not pre-drilled which allows every installation the ability to make any unique changes needed.
Ships fully assembled in a wooden crate via freight carrier. Is delivered curbside.
Read more about the benefits of bypassing doors here.Yes. We use engineered lumber, which is solid lumber, for the stiles and rails which increases the doors strength and reduces warping and twisting. There are a variety of center panel options and if the center is wood, typically solid wood is used. Some styles use an MDF center panel to create the desired look.
Shakes are only on the front side, with a flat panel with a matching finish on the back.
Yes. We prefer to professionally fully assemble the door for you. We have found a significant decrease in shipping damage and increase in customer happiness when ship an assembled door in a create.
For both Kit and Assembled doors the hardware (hangers, handles and pulls) are not installed and the doors are not pre-drilled which allows every installation the ability to make any unique changes needed specific to your needs.
Yes, our patented adjustable spacers and header-boards allow the door to be installed over existing door frames.
Yes. We use engineered lumber, which is solid lumber, for the stiles and rails which increases the doors strength and reduces warping and twisting. There are a variety of center panel options and if the center is wood, typically solid wood is used. Some styles use an MDF center panel to create the desired look.
Shakes are only on the front side, with a flat panel with a matching finish on the back.
Yes. We prefer to professionally fully assemble the door for you. We have found a significant decrease in shipping damage and increase in customer happiness when ship an assembled door in a create.
For both Kit and Assembled doors the hardware (hangers, handles and pulls) are not installed and the doors are not pre-drilled which allows every installation the ability to make any unique changes needed specific to your needs.
Yes, our patented adjustable spacers and header-boards allow the door to be installed over existing door frames.