Your order is processing
Please do not press the back button or refresh the page.
FREE SHIPPING*Orders of $200 or more qualify. Free shipping applies to most products. Front doors, interior jammed doors & custom orders have shipping costs which are calculated at checkout.

Modern Flush Door Installation Instructions

The Modern Flush is one of the iconic Barn Doors that is timeless, and will make almost any space better. Download Instructions PDF for the Modern Flush Door are also available.

Modern Flush Door Instructions & Video

Modern Flush Recommended Tools
  • Pencil
  • Tape Measure
  • Chisel
  • Hammer
  • Rubber Mallet
  • Phillips Screw Driver

Modern Flush Parts
  • Phillips Screws
  • Door Pull

Modern Flush Door Pull Specs

Note: The center point of the door pull should be three feet above the bottom edge of the door. Avoid placing the door pull too close to the edge of the door. Placing the pull too close to the edge can damage both door and pull.

1. Using a measuring tape and pencil, mark the desired location for the door pull. The normal height for a pull is 36” from the bottom of the door (Figure 1).

2. Once the pull is in the desired position, trace around the exterior inset surface with a pencil (Figure 2).

3. Using a hammer and chisel, forstner bit, or router, remove the wood inside the tracing on the door. Be aware of the depth as you work; the depth should be no more than 3/8” (Figure 3).

4. Using a rubber mallet, gently tap the door pull into the chiseled area for a test fit, correcting depth and shape as needed. The pull should fit snuggly and the lip of the pull should rest evenly on the door surface (Figure 4).

5. Attach the pull to the door using a phillips screw driver and the provided screws (Figure 5).

Get News & Special Offers
You've already subscribed to our list!Sorry, looks like your address is incomplete.Get ready to be inspired!
Hi {{}} Discounts Applied · Logout
Wish List
My Wishlist
Sample Room
My Sample Room
{{part.price | myCurrency}}