
Rustica Unassembled Kit Door Guide
1. In some areas of the country we see more damage than acceptable when kits doors are shipped unassembled in a ground shipping box, so it is possible that a kit door may ship in a crate via a freight carrier so that your beautiful door arrives without damage.
2. If shipped put together in a crate the overlays will be left to be installed on site. We recommend that you attach them with pin nails, wood glue or (if neither of those are good options) you can use ½” wood screws (not included and not recommended).
3. Many Rustica door kits have the same options as the recommended Rustica assembled doors but are offered with a more economical price.
4. Door kits do not have a warranty against warping, separating or splitting.
5. It is possible that your kit door may come unassembled and need to be assembled using the 7 inch lag screws through the side of the stiles.
6. For both Kit and Assembled doors... the hardware (hangers, handles and pulls) are not installed and the doors are not pre-drilled which allows every installation the ability to make any unique changes needed.
Both. This door has a metal frame which holds the beautifully carved MDF panel.
Yes. The center panel is made from a single piece of MDF artistically carved on our CNC machine for the perfect geometric pattern that you see.
The metal frame is 1.5 inches thick and the wood tongue and groove slats are 3/4 inch thick.
The hardware (hangers and pulls) are not installed but the metal door frame is prepared with riv-nuts for the hangers and the pulls to allow easy installation.
No. The geometric pattern on this door is only on the front. The back is a smooth panel painted in the same color as the front.
Both. This door has a metal frame which holds the beautifully carved MDF panel.
Yes. The center panel is made from a single piece of MDF artistically carved on our CNC machine for the perfect geometric pattern that you see.
The metal frame is 1.5 inches thick and the wood tongue and groove slats are 3/4 inch thick.
The hardware (hangers and pulls) are not installed but the metal door frame is prepared with riv-nuts for the hangers and the pulls to allow easy installation.
No. The geometric pattern on this door is only on the front. The back is a smooth panel painted in the same color as the front.