Brickmold Material

Brickmold material is sold as 1 individual piece. They are not pre-cut. They will need to be sized and cut on site.

Brickmold is used as casing primarily around the outside of exterior doors. Some kind of trim or casing is often used on the interior as well and brickmold can be used on both the inside and the outside. Rustica's brick mold is 3 inches wide and 1.5 inches deep. It is cut with a rough expectation of fitting your door, but with so many variables some trimming may need to be done on site.

Typically 3 lengths of brick mold is sufficient for the outside of a door. If you are also using brickmold for the inside casing you will need another set of 3 lengths. If you door is taller than 8ft you may be able to use the cut off piece from the top part but it is your responsibility to know how much you need for your size door.