The Surface Mounted Flush Pull is one of the iconic Barn Door Pulls that is timeless, and will make almost any space better. Download Instructions PDF for the Surface Mounted Flush Pull are also available.
All measurements are shown in inches
Use the surface mounted flush pull to mark hole spacing on door, then drill pilot holes using a small drill bit. An 1/8” works well.
Using a 3/8” drill bit and using your pilot holes as a guide, drill through door making sure to keep the drill sqaure with the door at all times.
Attach the two pieces of the pull with the provided bolts and a 3/16”Allen wrench making sure that the surface mounted flush pull is on the side closest to the wall.
Hitching Post
Event Venue
1520 N Main Street
Springville UT 84663
PRODUCTS
FEATURES
COMPANY
BUSINESS