FREE SHIPPING*Most orders over $500 qualify. Free shipping applies to Barn Door Hardware, Barn Doors, and Pocket Doors over $500. Front doors, interior doors, shower doors, any oversized door (wider than 3ft and taller than 7ft) and any special order doors have shipping costs which are calculated at checkout. Some barn door hardware track lengths do not qualify for free shipping.
-1601395521090.avif)
The center point of the door pull should be three feet above the bottom edge of the door. Avoid placing the door pull too close to the edge of the door. Placing the pull too close to the edge can damage both door and pull.
To install the Palm Springs door pulls, use the REAR pull as a template to mark the holes for the pulls. Gently place the rear pull on the front of the door. The bottom of the pull should be 33 1/2 from the bottom of the door and the pull should be approx. 11/4 inches from the edge. Mark the holes with a pencil once you’re certain of the placement. Drill a small pilot hole first, the use a 9/16 drill bit to drill the holes for the front pull posts. Put the front pull in place and fasten the rear pull from the back using the screws provided.
800-891-8312
